Vi bøger
Levering: 1 - 2 hverdage

Bøger af Andreas Ochsner

Filter
Filter
Sorter efterSorter Populære
  • af Andreas Ochsner
    856,95 - 1.117,95 kr.

  • af Andreas Ochsner
    963,95 kr.

    This book presents the research outcomes from cooperative projects with industrial partners. It showcases the practical relevance of the research, features the knowledge exchange. The papers cover a wide range of engineering disciplines, highlighting the impact of these collaborations in addressing real-world challenges and advancing technological developments.

  • af Andreas Ochsner
    1.345,95 - 1.354,95 kr.

    This monograph provides a compact introduction into the classical, i.e. rate-independent, plasticity theory. Starting from the engineering stress-strain diagram, the concept of elastic and elasto-plastic material behavior is introduced, as well as the concept of uniaxial and multiaxial stress states. Continuum mechanical modeling in the elasto-plastic range requires, in regards to the constitutive equation, in addition to the elastic law (e.g. Hooke's law), a yield condition, a flow rule and a hardening rule. These basic equations are thoroughly introduced and explained for one-dimensional stress states. Considering three-dimensional plasticity, different sets of stress invariants to characterize the stress matrix and the decomposition of the stress matrix in its hydrostatic and deviatoric part are introduced. Furthermore, the concept of the yield condition, flow rule and hardening rule is generalized for multiaxial stress states. Some typical yield conditions are introduced and their graphical representation in different stress spaces is discussed in detail. The book concludes with an introduction in the elasto-plastic finite element simulation of mechanical structures. In the context of numerical approximation methods, the so-called predictor-corrector methods are used to integrate the constitutive equations. This is again introduced in detail based on one-dimensional stress states and afterwards generalized to the three-dimensional case. Test your knowledge with questions and answers about the book in the Springer Nature Flashcards app.

  • af Andreas Ochsner
    1.188,95 kr.

    This book in the advanced structured materials series provides first an introduction to the mircomechanics of fiber-reinforced laminae, which deals with the prediction of the macroscopic mechanical lamina properties based on the mechanical properties of the constituents, i.e., fibers and matrix. Composite materials, especially fiber-reinforced composites, are gaining increasing importance since they can overcome the limits of many structures based on classical metals. Particularly, the combination of a matrix with fibers provides far better properties than the constituents alone. Despite their importance, many engineering degree programs do not treat the mechanical behavior of this class of advanced structured materials in detail, at least on the bachelor¿s degree level. Thus, some engineers are not able to thoroughly apply and introduce these modern engineering materials in their design process. The second part of this book provides a systematic and thorough introduction to the classical laminate theory based on the theory for plane elasticity elements and classical (shear-rigid) plate elements. The focus is on unidirectional lamina which can be described based on orthotropic constitutive equations and their composition to layered laminates. In addition to the elastic behavior, failure is investigated based on the maximum stress, maximum strain, Tsai-Hill, and the Tsai-Wu criteria. The introduced classical laminate theory provides a simplified stress analysis, and a subsequent failure analysis, without the solution of the system of coupled differential equations for the unknown displacements in the three coordinate directions. The book concludes with a short introduction to a calculation program, the so-called Composite Laminate Analysis Tool (CLAT), which allows the application of the classical laminate based on a sophisticated Python script.

  • af Andreas Ochsner
    521,95 kr.

    Dieses Übungsbuch beinhaltet eine umfangreiche Sammlung von Aufgaben zum Themenkomplex Leichtbau. Insbesondere werden die Grundlagen der Festigkeitslehre, Stoffleichtbau und Formleichtbau sowie Sandwichelemente behandelt. Dabei wird vor allem auf Grenzbeanspruchung und Optimierung der Strukturen eingegangen. Das Buch zeichnet sich durch detaillierte Müsterlösungen aus, sodass Studierende von Bachelor- und Masterstudiengängen die Lösungswege einfach nachvollziehen können. Das Werk ist dadurch auch für das Selbststudium bestens geeignet.

  • af Andreas Ochsner
    607,95 kr.

    This book treats the mechanical behavior of one-dimensional sandwich structures, a typicaloncept in the context of lightweight design. Such structures are composed of different constituent (e.g., layers) in order to achieve overall properties, which are better than for a single component alone. This book covers the basic mechanical load cases, i.e., tension/compression, bending, and shear. Based on this knowledge, different failure modes, i.e., plastic yielding, and global and local instabilities are investigated. In addition, an introduction to classic optimization problems, i.e., the formulation of an objective function (e.g., the weight of a structure) and corresponding restrictions, is included. The consideration here is limited to one- or two-dimensional design spaces, i.e., with a maximum of two design variables. For such simple cases, the minimum of the objective function can often be determined using analytical or graphical methods.

  • af Andreas Ochsner, Azman Ismail & Wardiah Mohd Dahalan
    1.760,95 kr.

  • af Andreas Ochsner, Muhamad Husaini Abu Bakar & Muhammad Al-Hapis Abdul Razak
    1.648,95 kr.

  • af Andreas Ochsner, Azman Ismail & Wardiah Mohd Dahalan
    1.978,95 kr.

  • af Andreas Ochsner, Muhamad Husaini Abu Bakar & Mohd Nurhidayat Zahelem
    2.201,95 kr.

    This book contains the selected, peer-reviewed manuscripts presented at the Conference on Multidisciplinary Engineering and Technology (COMET 2019), held at the University Kuala Lumpur Malaysian Spanish Institute (UniKL MSI), Kedah, Malaysia, from September 18 to 19, 2019. This event presented research being carried out in the field of mechanical, manufacturing, electrical and electronics for engineering and technology. This book also contains the manuscripts from the System Engineering and Energy Laboratory (SEELAB) research cluster, UniKL, which is actively doing research mainly focused on artificial intelligence, Internet of things, metal air batteries, advanced battery materials and energy material modelling fields. This book is the fourth edition of the progress in engineering technology, Advanced Structured Materials which provides in-depth ongoing research activities among academia of UniKL MSI.

  • af Andreas Ochsner & Marco Öchsner
    1.317,95 kr.

  • af Andreas Ochsner, Azman Ismail & Wardiah Mohd Dahalan
    2.199,95 kr.

  • af Andreas Ochsner
    1.390,95 - 1.430,95 kr.

    This book presents the developments in engineering design application. The chapters on mechanical, materials, computer and process engineering provide the foundation for the design and development of improved structures, materials and processes. They present alternatives with cost reduction and environmental demands. The book content links the interaction of classical engineering with the health, medical and environmental sector.

  • af Andreas Ochsner & Resam Makvandi
    1.538,95 kr.

  • af Andreas Ochsner
    473,95 kr.

    Dieses Lehrbuch stellt die unterschiedlichen Leichtbaukonzepte anhand einfacher eindimensionaler Strukturen in sehr verständlicher Weise dar und ermöglicht einen leichten Einstieg in das Thema. Es werden nachvollziehbare Informationen und Hinweise zur Werkstoffauswahl und geometrischen Gestaltung von Bauteilen gegeben.

  • af Andreas Ochsner
    1.219,95 kr.

  • af Andreas Ochsner
    427,95 kr.

  • af Azman Ismail
    1.560,95 - 1.650,95 kr.

    This book reports research findings and outcome from various discipline of engineering and technology, focusing on industrial technology operation and sustainable development. The content is the results of research done at the Research and Innovation Section of the Universiti Kuala Lumpur - MITEC as well as several experts from other institutions in Malaysia. The content describes the latest knowledge and development aligned with current trends of industrial technology operation in Malaysia.

  • af Andreas Ochsner
    383,95 kr.

  • - Mechanical Characterization and Finite Element Simulation
    af Andreas Ochsner, Ardiyansyah Syahrom & Muhamad Noor Harun
    1.067,95 - 1.153,95 kr.

    This book provides comprehensive mechanobiological insights into bone, including the microstructure of cancellous bone and its realistic loading in the human body. This approach considers different types of loads, i.e. static and dynamic, and the response under uniaxial and multiaxial loading conditions.

  • - An Introduction Based on the Finite Element Method
    af Andreas Ochsner
    412,95 - 1.196,95 kr.

    It helps students succeed in mechanics courses by showing them how to apply the fundamental knowledge they gained in the first years of their engineering education to more advanced topics.In order to deepen readers' understanding of the derived equations and theories, each chapter also includes supplementary problems.

  • - Modeling and Simulation of Rods and Beams
    af Andreas Ochsner
    1.443,95 - 1.487,95 kr.

    After working with this new book and reviewing the provided solved and supplementary problems, it should be much easier to study and understand the advanced theory and the respective text books.

  • - A Consistent Approach
    af Andreas Ochsner
    492,95 kr.

    The derivation and understanding of Partial Differential Equations relies heavily on the fundamental knowledge of the first years of scientific education, i.e., higher mathematics, physics, materials science, applied mechanics, design, and programming skills.

  • - An Introduction Based on the Computer Algebra System Maxima
    af Andreas Ochsner
    412,95 kr.

    This book is intended as an essential study aid for the finite element method.

Gør som tusindvis af andre bogelskere

Tilmeld dig nyhedsbrevet og få gode tilbud og inspiration til din næste læsning.