Bøger i Lecture Notes in Production Engineering serien

This contributed volume contains the research results of the priority programme (PP) 1480 "Modelling, Simulation and Compensation of Thermal Effects for Complex Machining Processes", funded by the German Research Society (DFG).

The focus of the conference was on "Smart Product Engineering", covering two major aspects of modern product creation: the development of intelligent ("smart") products as well as the new ("smart") approach of engineering, explicitly taking into account consistent systems integration.

This open access book contains the research report of the Collaborative Research Center "Micro Cold Forming" (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million).

The MCPC 2014 is a multi-track conference featuring a combination of high profile keynotes with expert talks, panel discussions, paper sessions, workshops, receptions, and much more.

This edited volume contains research results presented at the 12th International Symposium Continuous Surface Mining, ISCSM Aachen 2014. The target audience primarily comprises researchers in the lignite mining industry and practitioners in this field but the book may also be beneficial for graduate students.

This contributed volume presents the research results of the program "Small machine tools for small work pieces" (SPP 1476), funded by the German Research Society (DFG). The target audience primarily comprises research experts and practitioners in the field of micro machine tools, but the book may also be beneficial for graduate students.

The book summarizes the results of the European research project "Intelligent fixtures for the manufacturing of low rigidity components" (INTEFIX).

The approach to the solution within the CRC/TR 96 financed by the German Research Foundation DFG aims at measures that will allow manufacturing accuracy to be maintained under thermally unstable conditions with increased productivity, without an additional demand for energy for tempering. The challenge of research in the CRC/TR 96 derives from the attempt to satisfy the conflicting goals of reducing energy consumption and increasing accuracy and productivity in machining.In the current research performed in 19 subprojects within the scope of the CRC/TR 96, correction and compensation solutions that influence the thermo-elastic machine tool behaviour efficiently and are oriented along the thermo-elastic functional chain are explored and implemented. As part of this general objective, the following issues must be researched and engineered in an interdisciplinary setting and brought together into useful overall solutions: 1.  Providing the modelling fundamentals to calculate the heat fluxes and the resulting thermo-elastic deformations in a comprehensive manner, 2.  Mapping of the structural variability as a result of the relative movement inside the machine tool,3.  Providing the tools for an efficient adjustment of parameters that vary greatly in time and space by means of parameter identification methods as a prerequisite for correction and compensation solutions,4.  Engineering and demonstrating solutions to control-integrated correction of thermo-elastic errors by an inverse position setpoint compensation of the error at theTCP,5.  Engineering and demonstrating solutions based on the material properties to compensate for thermo-elastic effects through a homogeneous propagation of the temperature field, as well as reducing and smoothing the distribution of heat dissipated in supporting structures,6.  Developing metrological fundamentals to record the thermo-elastic errors in special structural areas of machine tools,7.  Engineering a methodological approach to simultaneous and complex evaluation of the CRC/TR 96 solutions, referring to their impact on product quality, production rate, energy consumption and machine tool costs

The fuel consumption of a modern combustion engine is one of the most important purchase criteria in contemporary society. Within an interdisciplinary research group sponsored by the German Research Foundation, scientists at the Leibniz Universitat Hannover and Universitat Kassel have been working together to investigate this research topic.

This contributed volume contains the research results presented at the 4th Machining Innovations Conference, Hannover, September 2013. The topic of the conference are new production technologies in aerospace industry and the focus is on energy efficient machine tools as well as sustainable process planning.

This volume provides a comprehensive overview about the production of metal micro parts. It describes metal forming technologies as well as related technologies like simultaneous engineering.

In comparing replacement overtime with standard and random replacement techniques theoretically and numerically, 'Maintenance Overtime Policies in Reliability Theory' highlights the key improvements to be gained by adopting this new approach and shows how they can be applied to inspection policies, parallel systems and cumulative damage models.

This contributed volume collects research papers, presented at the CIRP Sponsored Conference Robust Manufacturing Control: Innovative and Interdisciplinary Approaches for Global Networks (RoMaC 2012, Jacobs University, Bremen, Germany, June 18th-20th 2012).

This contributed volume contains the research results presented at the 4th Machining Innovations Conference, Hannover, September 2013. The topic of the conference are new production technologies in aerospace industry and the focus is on energy efficient machine tools as well as sustainable process planning.

This highly developed production technology requires several consecutive, well-matched processing steps called a "process chain" covering all steps from mold design, advanced machining and coating of molds, up to the actual replication and final precision measurement of the quality of the optical components.

This contributed volume collects the scientific results of the DFG Priority Program 1180 Prediction and Manipulation of the Interactions between Structures and Processes.

The approach to the solution within the CRC/TR 96 financed by the German Research Foundation DFG aims at measures that will allow manufacturing accuracy to be maintained under thermally unstable conditions with increased productivity, without an additional demand for energy for tempering. The challenge of research in the CRC/TR 96 derives from the attempt to satisfy the conflicting goals of reducing energy consumption and increasing accuracy and productivity in machining.In the current research performed in 19 subprojects within the scope of the CRC/TR 96, correction and compensation solutions that influence the thermo-elastic machine tool behaviour efficiently and are oriented along the thermo-elastic functional chain are explored and implemented. As part of this general objective, the following issues must be researched and engineered in an interdisciplinary setting and brought together into useful overall solutions: 1.  Providing the modelling fundamentals to calculate the heat fluxes and the resulting thermo-elastic deformations in a comprehensive manner, 2.  Mapping of the structural variability as a result of the relative movement inside the machine tool,3.  Providing the tools for an efficient adjustment of parameters that vary greatly in time and space by means of parameter identification methods as a prerequisite for correction and compensation solutions,4.  Engineering and demonstrating solutions to control-integrated correction of thermo-elastic errors by an inverse position setpoint compensation of the error at the TCP,5.  Engineering and demonstrating solutions based on the material properties to compensate for thermo-elastic effects through a homogeneous propagation of the temperature field, as well as reducing and smoothing the distribution of heat dissipated in supporting structures,6.  Developing metrological fundamentals to record the thermo-elastic errors in special structural areas of machine tools,7.  Engineering a methodological approach to simultaneous and complex evaluation of the CRC/TR 96 solutions, referring to their impact on product quality, production rate, energy consumption and machine tool costs

The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology.

This edited volume contains research results presented at the 12th International Symposium Continuous Surface Mining, ISCSM Aachen 2014. The target audience primarily comprises researchers in the lignite mining industry and practitioners in this field but the book may also be beneficial for graduate students.

The fuel consumption of a modern combustion engine is one of the most important purchase criteria in contemporary society. Within an interdisciplinary research group sponsored by the German Research Foundation, scientists at the Leibniz Universitat Hannover and Universitat Kassel have been working together to investigate this research topic.

The MCPC 2014 is a multi-track conference featuring a combination of high profile keynotes with expert talks, panel discussions, paper sessions, workshops, receptions, and much more.

This contributed volume collects the scientific results of the DFG Priority Program 1180 Prediction and Manipulation of the Interactions between Structures and Processes.

This volume provides a comprehensive overview about the production of metal micro parts. It describes metal forming technologies as well as related technologies like simultaneous engineering.

Collects research papers, presented at the "5th CIRP International Conference on Industrial Product-Service Systems", Ruhr-Universitat Bochum, Germany, March 14th - 15th, 2013. In this title, these research papers provide the developments in the broad area of product service systems.

The focus of the conference was on "Smart Product Engineering", covering two major aspects of modern product creation: the development of intelligent ("smart") products as well as the new ("smart") approach of engineering, explicitly taking into account consistent systems integration.

Cutting and abrasive technologies are the backbone of precision production in machine, automotive and aircraft building as well as of production of consumer goods. This book presents the knowledge of modern manufacturing in these technologies.

This contributed volume collects research papers, presented at the CIRP Sponsored Conference Robust Manufacturing Control: Innovative and Interdisciplinary Approaches for Global Networks (RoMaC 2012, Jacobs University, Bremen, Germany, June 18th-20th 2012).

This contributed volume contains the research results of the priority programme (PP) 1480 "Modelling, Simulation and Compensation of Thermal Effects for Complex Machining Processes", funded by the German Research Society (DFG).