Bøger udgivet af Kronos Robotics

In book one of the KRMx01 series you completed the basic construction of the KRMx01 CNC. You wired the KRMx01 electronics and configured the Mach3 controller software. In this book, the second in the series, you will add cable management, an emergency stop switch, clamp table, and homing switches. In addition you will be taken step-by-step through the operation of your KRMx01 CNC.

The KRMx01 is a CNC router you build yourself using basic tools. Each chapter is a step-by-step project in its self. Each chapter presents you with a listing of tools and components required to complete the chapter. In addition each chapter includes time and cost estimates so you can budget your time as well as your funds.

HANS is a wooden gear clock that was designed from the ground up to help you successfully build your first gear clock. Many wooden gear clocks utilize weights to power the gear clock. These weights mean you have to wind the clock every couple days. The HANS electric gear clock utilizes an easy to obtain synchronous motor to drive the clock. This motor attached to the first gear, will keep the clock accurate to within a second or two each month. Gear Cutting Techniques: The gears used in the HANS clock can be made by tracing and cutting with a saw, or by using a set of templates and a router table. Plate Design: The plates were designed so that only the arbor hole locations are critical. You are free to alter the plate shape as you see fit. The Book: This book consists of 136 pages grouped into 11 chapters. The book will take you step by step through the process of building a real working gear clock.