Udvidet returret til d. 31. januar 2025

Bøger i Integrated Circuits and Systems serien

Filter
Filter
Sorter efterSorter Serie rækkefølge
  • af Anantha P. Chandrakasan & Patrick P. Mercier
    915,95 kr.

    This book explores the design of ultra-low-power radio-frequency integrated circuits (RFICs), with communication distances ranging from a few centimeters to a few meters. The authors describe leading-edge techniques to achieve ultra-low-power communication over short-range links. Many different applications are covered, ranging from body-area networks to transcutaneous implant communications and smart-appliance sensor networks. Various design techniques are explained to facilitate each of these applications.

  •  
    2.166,95 kr.

    This book explains the physics and properties of multi-gate field-effect transistors (MuGFETs), how they are made and how circuit designers can use them to improve the performances of integrated circuits.

  • - 60 GHz and Beyond
     
    2.427,95 kr.

    This book compiles and presents the research results from the past five years in mm-wave Silicon circuits. This area has received a great deal of interest from the research community including several university and research groups. The book covers device modeling, circuit building blocks, phased array systems, and antennas and packaging.

  • - Algorithms and Architectures
     
    1.789,95 kr.

    High Efficiency Video Coding (HEVC)

  • - Algorithms and Architectures
     
    1.606,95 kr.

  •  
    1.658,95 kr.

    This book provides a comprehensive introduction to embedded flash memory, describing the history, current status, and future projections for technology, circuits, and systems applications. The authors describe current main-stream embedded flash technologies from floating-gate 1Tr, floating-gate with split-gate (1.5Tr), and 1Tr/1.5Tr SONOS flash technologies and their successful creation of various applications. Comparisons of these embedded flash technologies and future projections are also provided. The authors demonstrate a variety of embedded applications for auto-motive, smart-IC cards, and low-power, representing the leading-edge technology developments for eFlash. The discussion also includes insights into future prospects of application-driven non-volatile memory technology in the era of smart advanced automotive system, such as ADAS (Advanced Driver Assistance System) and IoE (Internet of Everything). Trials on technology convergence and future prospects of embedded non-volatile memory in the new memory hierarchy are also described.Introduces the history of embedded flash memory technology for micro-controller products and how embedded flash innovations developed;Includes comprehensive and detailed descriptions of current main-stream embedded flash memory technologies, sub-system designs and applications;Explains why embedded flash memory requirements are different from those of stand-alone flash memory and how to achieve specific goals with technology development and circuit designs;Describes a mature and stable floating-gate 1Tr cell technology imported from stand-alone flash memory products - that then introduces embedded-specific split-gate memory cell technologies based on floating-gate storage structure and charge-trapping SONOS technology and their eFlash sub-system designs;Describes automotive and smart-IC card applications requirements and achievements in advanced eFlash beyond 40nm node.

  • - Benefits of Body-Biasing Techniques for FDSOI Circuits and Systems
     
    1.412,95 kr.

    This book discusses the advantages and challenges of Body-Biasing for integrated circuits and systems, together with the deployment of the design infrastructure needed to generate this Body-Bias voltage.

  •  
    1.116,95 kr.

    MEMS-based Circuits and Systems for Wireless Communications provides comprehensive coverage of RF-MEMS technology from device to system level.

  •  
    1.105,95 kr.

    On any advanced integrated circuit or "system-on-chip" there is a need for security. The purpose of the book is to give the integrated circuits and systems designer an insight into the basics of security and cryptography from the implementation point of view.

  •  
    1.726,95 kr.

    This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics.

  • - A Constructive Approach
    af Michael Orshansky, Sani Nassif & Duane S. Boning
    1.682,95 - 1.999,95 kr.

    Design for Manufacturability and Statistical Design: A Comprehensive Approach presents a comprehensive overview of methods that need to be mastered in understanding state-of-the-art design for manufacturability and statistical design methodologies.

  •  
    1.111,95 kr.

    The world is poised for adoption of wireless technology at a mass market level. This book discusses communications circuit and system solutions for multiple communication standards and future generations of wireless communications.

  • - EDA, Design and Microarchitectures
     
    1.687,95 kr.

    This came with the simultaneous improvement of individual device perf- mance as well as the reduction of device power such that the total power of the resulting ICs remained under control. The trouble began a number of years ago when CMOS devices were no longer able to proceed along the classical scaling trends.

  • - Estimation and Optimization
    af Prashant Saxena, Sachin S. Sapatnekar & Rupesh S. (Intel Corporation) Shelar
    1.221,95 - 1.723,95 kr.

    This volume provides a complete understanding of the fundamental causes of routing congestion in present-day and next-generation VLSI circuits, offers techniques for estimating and relieving congestion, and provides a critical analysis of the accuracy and effectiveness of these techniques.

  •  
    2.176,95 kr.

    This book explains the physics and properties of multi-gate field-effect transistors (MuGFETs), how they are made and how circuit designers can use them to improve the performances of integrated circuits.

  •  
    1.771,95 kr.

    This book is based on a graduate course entitled, Ubiquitous Healthcare Circuits and Systems, that was given by one of the editors at his university. The material focuses on the design of biomedical ICs rather than focusing on how to use prepared ICs.

  • - The Experience of Watch Developments
    af Eric A. Vittoz
    2.161,95 - 2.164,95 kr.

    Covering the analysis and design of the most important integrated oscillator circuits, this book shows how to optimize them using the resonator's high Q to achieve the minimum power consumption compatible with frequency stability and phase noise requirements.

  •  
    943,95 kr.

    MEMS-based Circuits and Systems for Wireless Communications provides comprehensive coverage of RF-MEMS technology from device to system level.

  • af Keren Bergman, Luca P. Carloni, Aleksandr Biberman, mfl.
    1.258,95 - 1.295,95 kr.

    This comprehensive book provides a synthesis of the theory and practice of photonic devices for networks-on-chip. It outlines the issues in designing photonic network-on-chip architectures for future many-core high performance chip multiprocessors.

  • - A Technology-Enabled Revolution
     
    1.314,95 kr.

    Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain.

  • af Harry D. Foster & Adam C. Krolnik
    1.201,95 - 1.692,95 kr.

    This book presents formal testplanning guidelines with examples focused on creating assertion-based verification IP. It demonstrates a systematic process for formal specification and formal testplanning and is the first book published on this subject.

  •  
    1.739,95 kr.

    Provides coverage of the aspects of a complex microprocessor design process from technology, power management, clocking, and more. This book is intended for design engineers working in the related areas and a source of technical information as well as a comprehensive reference in the field. It is also useful for technical and business managers.

  • af Brian Otis & Jan Rabaey
    1.443,95 - 1.583,95 kr.

    This book is written for academic and professional researchers designing communication systems for pervasive and low power applications. The main emphasis is on design techniques for low power, highly integrated transceivers.

  •  
    1.691,95 kr.

    This book focuses on foundry-based process technology that enables the fabrication of 3-D ICs. However, this book does not include a detailed discussion of 3-D ICs design and 3-D packaging. This is an edited book based on chapters contributed by various experts in the field of wafer-level 3-D ICs process technology.

  •  
    1.776,95 kr.

    Kevin Zhang Advancement of semiconductor technology has driven the rapid growth of very large scale integrated (VLSI) systems for increasingly broad applications, incl- ing high-end and mobile computing, consumer electronics such as 3D gaming, multi-function or smart phone, and various set-top players and ubiquitous sensor and medical devices.

  •  
    2.061,95 kr.

    Traditionally, Alpha processors - hibited highly innovative clocking systems, always worthy of ISSCC/JSSC publi- tions and for a while Alpha processors were leading the industry in terms of clock performance.

  •  
    1.681,95 kr.

    Multicore Processors and Systems provides a comprehensive overview of emerging multicore processors and systems. It covers technology trends affecting multicores, multicore architecture innovations, multicore software innovations, and case studies of state-of-the-art commercial multicore systems.

  •  
    1.999,95 kr.

    Covers in detail promising solutions at the device, circuit, and architecture levels of abstraction after first explaining the sensitivity of the various MOS leakage sources to these conditions from the first principles.

  • - Theory, Fabrication and Characterization
    af Ioannis Kymissis
    1.109,95 - 1.209,95 kr.

    As a basic introduction to the subject for practitioners, this text will also be of interest to researchers looking for references that are not part of their subject area, focusing on materials and techniques useful for making integrated circuits.

  • af Gary D. Hachtel, Fabio Somenzi & Chao Wang
    1.133,95 - 1.382,95 kr.

    This book summarizes recent research on abstraction techniques for model checking large digital system. Considering the size of today's digital systems and the capacity of state-of-the-art verification algorithms, abstraction is the only viable solution for the successful application of model checking techniques to industrial-scale designs.

Gør som tusindvis af andre bogelskere

Tilmeld dig nyhedsbrevet og få gode tilbud og inspiration til din næste læsning.